Air-entraining compounds

Berolan LP-50

CE-Nr.: 1139-CPD-0802/09

Application

Berolan® LP 50 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on gypsum, lime, or cement. It leads to a better plaster yield, to improved workability, and improves the wetting of the mortar. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized.

Berolan LP-70

Application

Berolan® LP 70 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on cement, gypsum or lime. It leads to a better plaster yield, to improved workability and improves the wetting of the mortar. Related to the longer open timea tearing of the plaster surface and skin formation will be reduced. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized.

Berolan LP-100

CE-Nr.: 1139-CPD-0802/09

Application

Berolan® LP 100 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on gypsum, lime, or cement. It leads to a better plaster yield, to improved workability, and improves the wetting of the mortar. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized.

Berolan LP-200

Application

Berolan® LP 200 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on gypsum, lime, or cement. It leads to a better plaster yield, to improved workability, and improves the wetting of the mortar. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage. Irritation of the respiratory organs has been minimized.

Berolan HS-30

CE-Nr.: 1139-CPD-0802/09

Application

Berolan® LP-HS 30 is a strongly surface-active air-entraining admixture and plasticizer. It has been developed especially for use in mortars based on cement, gypsum or lime. It leads to a better plaster yield, to improved workability and improves the wetting of the mortar. It decreases the wear of mixing units, the tendency to lumping, and the shrinkage.

Berolan CO-5

Application

Berolan CO 5 a mixture of cellulose ether, air entraining agent, hydrophobic agent, calcium carbonatefiller and expanded glass granulate Berolan CO 5 is a compound for use in renovation mortar. All required additives for air entraining, water retention and hydrophobizing are combined. The optimal dosage should be determined by preliminary tests. For first tests we advise a dosage of 4 % Berolan CO 5 on dry mortar.

Beropur

Application

Beropur is a compound of a starch ether and a surfactant. The active substance contents are deliberately reduced to allow a workable dosage. Beropur is used as a wetting agent and stabilizer in gypsum-bonded plasters.

Berolan LP-700

Application

The product Berolan LP-700 is a compound of starch-ether and a tenside (sodiumlaurylsulfate). The clay quotient in the binder agent is influenced to create clumps in the gypsum-bonded plasters.

Berolan LP-700 reduces this effect of creating clumps in the plaster. That means if the nodule quantity in the plaster is increased Berolan LP-700 will also be increased.

For the first tests we recommended 0,03 % Berolan LP-700 based on the dry mortar. The optimal dosage is to calculate by forgoing tests.

Berolan LP-80

Application

Berolan® LP-80 is a strongly surface-active air-entraining admixture and plasticizer. It is
used as an air-entrainer for various cement-based systems, specially qualified for
renovation render. Berolan LP-80 may be added as delivered. The required dosage
may vary over a wide range (0.05 to 0.5 %) and should therefore be evaluated in
suitable tests. For first trials we recommend 0.2 % Berolan LP-80 referred to dry
substrate.

Berolan CLD 25

Application

Berolan CLD 25 is a dust free air entraining compound and plasticizer which is used in different formulations for building materials based on gypsum, cement or lime. Necessary dosage to obtain specified air content depends on binder type, mixer type, w/c ratio, aggregate grading and fines.

Berolan Micropor 50

Application

Berolan® Micropor 50 is a surfactant mixture for the Generation of air pores in concrete, mortar and cement based artificial bricks. It is used as an air-entrainer for various cement-based and gypsum-based systems. Berolan® Micropor 50 is characterized by particularly stable and very fine air pores. The product is therefore particularly suitable for the production of light plasters, light-weight mortars, restoration plasters and dry concrete. Due to the microporous structure, however, post processing is also significantly improved in the case of cement and gypsum plasters. This can be seen by lighter felting and smoothing. Berolan® Micropor 50 improves workability and the wetting of the mortar. Berolan® Micropor 50 is characterized by the microporous structure.

A very high and stable air pore content can be achieved which is particularly desired in light mortar. The surfactant mix makes the product very stable and universally applicable.

Aktualisiert am 01.02.2017

Headquarter

Berolan GmbH

Technologiepark 17

A - 4320 Perg

Tel: +43(0)7262/54650

Email: office@berolan.at

www.berolan.com